More pumping capacity
A 1,100 GPH nominal marine pump for jobs that need more water-removal capacity than Mini.
Pro product view01 / 6
RainTaker Pro
More pumping capacity for larger open boats. An automatic bilge pump system with its own battery, onboard solar charging and optional ways to power it for longer.
$995.00USD
- 1,100 GPH nominal marine pump
- Larger onboard battery reserve
- Solar, wall and optional 12V charging
Free U.S. shipping2-year warranty
Save $150 on Mini when purchased with Pro or LowDeck. Applied automatically in your cart.
Shipping & delivery
Free U.S. shipping. Contact RainTaker for delivery details.
2-year warranty
Includes a 2-year warranty. Contact RainTaker for coverage and support details.
What’s in the box
Pro combines the pump, water sensor, battery and onboard solar panel, with a lockable handle and mounting pad. The supplementary solar panel and 12V accessory cord are optional and ship separately.
Setup & product manual
Position Pro where water collects, secure it as instructed and route the discharge hose safely overboard. Check the charge, sensor and hose before leaving it in use.
View setup guide / product manualSee Pro
get to work
Watch the RainTaker Pro controlled storm demonstration. See the sensor start the pump and collected water flow out through the discharge hose.
Watch the demonstration
More boat
More pumping
capacity
Rainwater still collects when you’re away. Give it a way out with a self-contained system built for larger open boats and more demanding water-removal jobs.
Explore the open-boat setup
Dual consoles
Open decks
Rainwater collects between days on the water. Pro senses it and pumps it away using its own battery.
See the battery & charging
Classic boats
Independent
power
Automatic water removal for the open boat you value. No permanent connection to its electrical system.
Check your setupRain in
Water out
Position Pro where water collects and route the hose safely overboard. The water sensor starts the pump, using Pro’s own battery.
- 01Water detected. Pump on.
Solid-state sensing starts the water-removal cycle.
- 02Independent power.
The onboard battery powers the marine pump without permanent boat wiring.
- 03Pause and retry when needed.
The controller manages low-charge cycles and protects the battery before full discharge.
ILLUSTRATED SEQUENCE
Everything
Pro does
Choose Pro 
Its own battery
A larger onboard reserve powers the larger pump without a permanent connection to your house bank.
Solar or wall charging
Recharge through the onboard solar panel or compatible AC wall power before putting Pro in place.
Optional 12V power
The Pro accessory cord powers and charges the system from a compatible boat or vehicle accessory socket.
Secure placement
A lockable handle and mounting pad help you position Pro using the approved setup instructions.
Marine construction
316 stainless hardware, a ¾-inch silicone discharge hose and two years of warranty coverage.
Solar by day
Ready after dark
Choose Pro The onboard panel replenishes stored energy in daylight. The battery powers water removal after dark, with the controller managing pauses and restarts as charge allows.
01Solar panel
Sunlight replenishes the onboard battery.
02Onboard battery
Stored energy stays ready after dark.
03Water out
When water arrives, the battery powers the pump.
Continuous runtime with no sun
Approximate continuous pumping from a full charge. Shorter automatic cycles can continue as stored energy allows.
Nominal pumping capacity
A larger marine pump. Installed flow depends on discharge height and hose routing.
Choose how you recharge
Built-in solar, compatible AC wall power and optional 12V accessory power.
A larger battery
For a larger pump
Pro’s additional reserve powers its higher-capacity pump. Low-voltage protection pauses pumping before the battery is fully discharged and resumes when enough power is available.
Power it your way
Add optional 12V
Charge with the sun or compatible AC wall power. The optional 12V cord also powers and charges Pro from a compatible boat or vehicle accessory socket.
More ways to keep it charged
Optional add-ons for RainTaker Pro. Add one here and it goes in the cart with your Pro.
Solar add-on
5W solar panel
- Works alongside the onboard panel to double charging capacity
- Includes a 15ft removable cable and teak 3M mounting pad
12V power
12V accessory cord
- Powers and charges Pro from a 12V accessory socket
- 25ft reach for a boat, RV, car or truck
Specifications
Choose Pro
- Water removal
- 1,100 GPH marine pumpNominal component rating. Installed flow depends on hose routing and discharge height.
- Continuous runtime
- Around 25–30 minutes without sunApproximate continuous pumping from a full charge. Available operation varies with charge and discharge setup.
- Activation
- Automatic water sensingSolid-state detection; no mechanical float switch.
- Battery
- Larger onboard NiMH reserveIndependent of the boat’s house battery. Low-voltage protection manages pause and restart.
- Charging
- Solar + AC wall powerOptional Pro-only 12V cord and 5W supplementary solar panel sold separately.
- Low-charge operation
- Automatic pause and retryCycles while water is detected and usable stored power remains. Solar charge can restore operation in daylight.
- Buoyancy
- Floating bodyFollow the setup guide for safe placement, securing and hose routing.
- Marine components
- 316 stainless hardware¾-inch silicone discharge hose.
- Placement
- Lockable handle & mounting padUse the approved securing and positioning instructions.
- Warranty
- 2 yearsTwo years of warranty coverage.
Have a dinghy,
too?
Give your dinghy its own system for the rainwater. A separate Mini keeps water removal independent of the bigger boat.
RainTaker Mini
Compact, portable water removal for dinghies, inflatables and small open boats.
- Automatic water sensingStarts pumping when collected water reaches the sensor.
- Its own battery and solar panelNo connection to the tender’s electrical system.
- Saltwater capableFor coastal tenders as well as freshwater use.
Overall rating5
Excellent
Based on 7 reviews
Service 0
Your experience helps someone choose.
Choose Pro when you need a higher-capacity nominal pump, a larger battery reserve or the optional 12V cord and supplementary solar panel. Fit depends on the collection point, available space, water volume and discharge route, rather than boat length alone.
No permanent wiring is required. Pro has its own battery and solar panel. The optional 12V cord plugs into a compatible accessory socket if you want to use an external battery.
Around 25–30 minutes of continuous pumping from a full charge, without sunlight. This is pumping time, not the length of time the system can remain in place. In normal use, the sensor runs the pump when water is present; charge, water volume and hose setup affect available operation.
When battery voltage falls, the controller can pause the pump and retry while water is still detected. These shorter cycles can continue after dark using the remaining stored energy. Available pumping depends on the charge remaining in the battery.
Low-voltage protection stops the pump before the battery is fully discharged. When daylight provides enough solar charge and water is still detected, the system can resume pumping automatically. Restart timing depends on the light available.
Yes. Pro has a buoyant body and can float if the water level rises around it, including while waiting for enough charge to resume. Follow the setup guide for placement, securing and hose routing. Floating is a product characteristic, not a guarantee against flooding or sinking.
The controller only starts a pumping cycle when there is enough power to move water. If voltage drops below its operating threshold, it pauses rather than continuing to run with too little power. Actual flow still depends on the hose route and discharge height.
Pro uses its larger reserve to power a larger pump. Both Mini and Pro provide approximately 25–30 minutes of continuous pumping from a full charge without sun. Choose Pro for greater pumping capacity and additional charging options.
Solar charging replenishes the battery when sufficient light reaches the panel. Available pumping depends on sunlight, the starting charge and the discharge setup. Keep the panel unobstructed and follow the charging guidance.
With the optional 12V cord connected, Pro can use the external battery for extended operation. If that battery is depleted, Pro can continue on its own internal reserve, with solar charging as sunlight allows. Available operation depends on remaining charge.
The optional 5W panel connects to the Pro accessory socket using its 10ft marine cable. It works alongside the onboard panel for supplementary charging, including shorter days and cloudy conditions. Actual charging depends on light and placement.
The 5W supplementary solar panel and 25ft 12V accessory cord are optional and sold separately. They ship separately from Pro, with free U.S. shipping.
Pro is intended for freshwater and saltwater use. Follow the product manual for placement, hose routing, cleaning and marine care.
Use Pro as supplemental water-removal equipment. It does not replace a required primary bilge system, routine checks, maintenance or emergency response. Heavy water ingress can exceed the system’s capacity.
Automatic saltwater bilge pump for Whalers, skiffs & RIBs
Professional-grade automatic water removal for dinghies, Zodiacs, Whalers, tenders and other open boats up to 30 feet, for freshwater and saltwater use.
Built with carbon-composite ABS and 316 stainless-steel hardware. No wiring or installation required, and no float switch to fail.
Try it risk-free: if you are not completely satisfied, return it within 30 days for a full refund. Contact RainTaker about the published factory extended-protection option for up to four years total coverage.
Pro specifications
- 9″ L × 6″ W × 4.5″ H; 5.5 lb.
- ABYC-rated 1,100 GPH marine pump; nominal component rating.
- Published removal capacity over 150 gallons per charge, depending on conditions.
- IP68-rated construction and 316 stainless-steel hardware.
- 6.5-foot, ¾″ silicone discharge hose with cleanable check valve.
- Integrated carry handle, included home charger and storage bag.
- 2-year no-hassle warranty.
Installed flow, pumping time and total water removed depend on hose routing, discharge height and available charge.
